Paint Extender
Paint Extender
Our Extender is great for those who want a longer open time with the paint, to help minimize the look of brush strokes and to extend drying time.
Painting in a dry climate or a space with low humidity? You may find your paint dries too fast. Buy yourself time with our uniquely formulated non-toxic extender – simply add it to the paint and you’ll have more time to brush back and forth to get the look you’re after!
The recommended ratio of 15 mL per pint (500 mL) of paint.
Using too much of this product will increase drying time substantially, but also increases cure time. Add a maximum of 10% of the original paint volume.
Application Tool | Drop in to paint |
Location | Interior/Exterior |
Re-coat Time | 2-12 hrs |
Dry Time | 2 hrs |
Clean Up | Water |
Coverage | Enough for 4 Pints of Fusion Mineral Paint |
Recommended Uses | To increase the open working time of acrylic water-based paints and finishes like Tough Coat for no brush strokes |
COVERAGE
1 bottle is good for 2-4 pints. Adding more is not recommended as it will impact your drying and curing time.
Recommended ratio of 15 mL per pint (500 mL) of paint.
WHAT IT WILL LOOK LIKE
Fusion Extender is a clear liquid and doesn’t change the colour of your paint.
CURE TIME
Using Fusion Extender does increase the cure time and dry time of your paint.
WHAT ELSE CAN IT BE USED FOR?
Our Extender can be used with other water-based paint products.
HOW TO USE
Add no more than 10% extender into your paint. Once mixed with Fusion Mineral Paint, apply paint as usual. You will notice a longer open drying time, thus giving you time to work with the paint and smooth out brush strokes.
Once your first coat fully dries, apply a subsequent coat as needed. We recommend waiting at least 4 hours between coats when using the Extender. Should you notice that applying your second coat is lifting off the first, either too much extender was used, or it needs more time to dry and cure before applying another coat.